Easy-to-use interface Class 1 and Class 2 models available Selectable outputs of 94 dB, 104 dB, and 114 dB at 1000 Hz 70 hours operation on AA alkaline batteries Auto-off feature Designed for ½-inch microphones Automatic calibration for SKC sound and noise instruments Supplied with a Certificate of Manufacturer Calibration NIST-traceable certificate option available IEC 60942:2017 compliant Class 1:…
Sample pump maintains accurate flow for particle separation Easy to read digital display showing instantaneous readings in mg/m3, and TWA, STEL, Minimum and Maximum Interchangeable size-selective impactors Built-in correction factors for fine and coarse particulate matter On-screen programmable sampling and storage options Large data storage capacity 10 hour run time with rechargeable NiMH battery Extended running time with AC adaptor…
Easy to set up and use Weatherproof case Clear display provides instantaneous readings (concentration, TWA, STEL, Minimum, Maximum) Simultaneous direct reading and gravimetric sampling measurements Interchangeable size-selective sampling heads for PM10, PM2.5, PM1.0 and TSP Integral sample pump Up to 24 hours operation on one battery charge Continuous operation with AC adaptor or optional solar panel Easy to use DustComm Pro…
The HAZ-DUST EPAM-7500 wireless portable PM monitor with touch screen operation provides simultaneous real-time measurement and display of PM10, PM2.5, and PM1.0, respirable, or TSP, temperature and relative humidity, and gravimetric sampling. Ultrasonic wind speed and direction measurement is available. Use the EPAM-7500 for roadside air quality studies, fenceline monitoring, hot spot location, IAQ surveys, and particle mitigation studies.
Easy touch screen operation Instantaneous, continuous display of TWA, STEL, Minimum, Maximum concentration in mg/m3 Sensor mounts directly in the breathing zone for a personal sample Interchangeable sampling inlets for Inhalable, Thoracic and Respirable measurement Can accept pre-weighed and preloaded 25 or 37 mm filter cassettes Small and lightweight with integral belt clip Operates for over 22 hours using rechargeable…
Easy operation and instantaneous readings in mg/m3 Two selectable measuring ranges Easy to read digital display Highly sensitive Operates for over 8 hours Built-in battery test facility Optional data logger, supplied with DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time Optional tripod with adjustable mounting for unattended monitoring The HAZ-DUST I uses near-forward light…
A dosemeter measures the actual noise that the worker receives at the ear, over time, and may be more easily understood than decibels, as it is displayed as a percentile. A 100% dose is the permitted level (87 decibels) experienced over 8 hours. The Dosemeter is also offered as part of the Legislation Starter Kit, Part No. 790-006NK.
Intuitive operation Measures 25 to 140 dB (Class 1), 30 to 140 dB (Class 2) 40 to 143 dB peak range 32 GB internal memory Up to 7 hours continuous run time on alkaline batteries All models available in Class 1 or 2 Dual measurements and time histories A, C, and Z weighting Slow, Fast, Impulse,…
Fast switching between applications Measures 25 to 140 dB Peak level from 40 to 143 dB User selectable measurement parameters Dual measurements A, C, and Z weighting Slow, Fast, Impulse, and Peak OSHA and ACGIH settings 6000 measurements stored (1 MB memory) Timer and datalogging Displays exposure dB, SPL, Leq, Lmax, Lpeak, Dose, and Ln (3 levels) 10+ hours continuous…
Accurate over a wide measuring range Simple operation and instantaneous display of TWA, STEL, Minimum, Maximum in mg/m3 Can be used as an active monitor by combining with a sample pump Operates for over 8 hours using rechargeable NiMH battery Extended running time using AC charger Compact and lightweight Backlit display for use in dim light conditions Audible alarm with…
