AIR-AIDE Airborne Particulate Indoor Air Monitor
- Sample pump maintains accurate flow for particle separation
- Easy to read digital display showing instantaneous readings in mg/m3, and TWA, STEL, Minimum and Maximum
- Interchangeable size-selective impactors
- Built-in correction factors for fine and coarse particulate matter
- On-screen programmable sampling and storage options
- Large data storage capacity
- 10 hour run time with rechargeable NiMH battery
- Extended running time with AC adaptor
- Optional wireless data transmission to PC
- Easy to use DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time
For exposure monitoring of dusts and aerosols including:
| Lead | Toxic soil remediation | Silica |
| Welding fumes | Tobacco smoke | Construction dust |
| Coal Dust | Dry chemical | Wood/paper |
| Oil mists | Concrete/cement | Grinding dusts |
| Cadmium | Pharmaceuticals | Nuisance dusts |
| Spray paint | Chromate | Grain |
Description
The AIR-AIDE is a fixed point monitor with interchangeable size-selective impactors to survey dust levels, and is powered by a long life internal air sample pump to maintain accurate flow for particle separation. The AIR-AIDE has built-in calibration factors for fine and coarse particulate matter.
SPECIFICATIONS
| Accuracy | ±10% to filter gravimetric SAE fine test dust |
| Sensing Range | 0.001 to 20 mg/m3 (or optional 0.01 to 200 mg/m3) |
| Display Resolution | 0.001 mg/m3 |
| Particle Size Range | 0.01 to 100 µm |
| Particle Size Measurement | 1 µm, 2.5 µm, 4.0 µm or 10 µm |
| Measurement Precision | ±0.03 mg/m3 (3 µg/m3) |
| Calibration | NIOSH 0600 gravimetric reference – NIST traceable SAE fine test dust |
| Displayed Particle Concentration | Instantaneous, TWA, STEL, Minimum, Maximum |
| Sample Flow Rate | 2 L/min |
| Power | Rechargeable NiMH battery or AC adaptor |
| Operating Time | ≥10 hours |
| Charging Time | <10 hours |
| Alarm Output | 90 dB at 3 ft |
| Digital Output | RS-232 |
| Data Storage | 21,600 data points |
| Sampling Rate | Short term: 2, 4, 10 seconds, Long term: 1, 10 or 30 minutes |
| Temperature | Operating: -10 to +50°C (14 to 122°F) |
| Storage: -20 to +70°C (-4 to 158°F) | |
| Dimensions | 7.6 x 15.2 x 22.9 cm (3 x 6 x 9″) |
| Weight | 2300 g (5lbs) |
AIR-AIDE
| Description | Part Number |
| AIR-AIDE Kit includes, | 770-600 |
| Monitor (0.001 to 20 mg/m3), NiMH battery, 110-240 V AC charger/adaptor, rotameter, impactor sleeve for TSP, DustComm Pro Software on USB Memory Stick, RS-232 computer cable and manual |
ACCESSORIES
| Description | Part Number |
| Size-selective Impactor PM1.0, interchangeable | 770-604 |
| Size-selective Impactor PM2.5, interchangeable | 770-605 |
| Size-selective Impactor PM4.0/respirable, interchangeable | 770-603 |
| Size-selective Impactor PM10, interchangeable | 770-606 |
| Impactor Grease | 770-211 |
| Impactor Sleeve, holds impactor for insertion into the sampling inlet | 770-602 |
| Calibration Standard, for verifying span and optical sensor performance | 770-207 |
| Radio Modem, 900 MHz with up to 450 m line-of-sight transmission | 770-505X |
| Tripod, adjustable stand (1 to 1.5 m) and mounting plate for unattended monitoring | 770-607 |
| Precipitation Cap, prevents rain and mist directly entering the sensor | 770-216 |
| Cleaning Kit, includes bulb, swabs and lens tissue (no air canister) | 770-305B |
| AC Charger 110-240 V , can be used to operate AIR-AIDE continuously | 770-608 |
| Replacement NiMH Battery Pack | 770-601 |
| DustComm Pro Software on USB Flash Drive | 770-225 |
DOCUMENTS
