Button Sampler
- Referenced in MDHS 14/4
- Small and lightweight
- Autoclavable
- Low sensitivity to wind direction and velocity
- Suitable for collecting bioaerosols for viable and non-viable analysis
- 4 L/min flow rate enhances sensitivity
Description
The Button Sampler is ideal for low level personal or area inhalable sampling. It is a filter sampler with a porous curved-surface inlet designed to improve the collection characteristics of inhalable dust (100 µm aerodynamic diameter), including bioaerosols for total (viable plus non-viable) microbial count. Its conductive stainless steel inlet reduces electrostatic effects. The evenly spaced holes act as sampling orifices for multi-directional sampling. The proximity of the filter to the inlet minimises transmission losses and provides for equal distribution of particle loading and low intersample variation. The Button Sampler uses 25 mm filters, and filters with pore sizes greater than 1 µm are recommended to lower back pressure and to enhance sample times with personal sample pumps.
SPECIFICATIONS
Flow Rate | 4 L/min* |
Sampling Inlet | Conductive Stainless Steel |
Body | Aluminium |
Support Screen | Stainless Steel |
Clip | Stainless Steel and nylon |
O-rings | PTFE (inlet) and BUNA-N (body) |
Filters | 25 mm** † |
Inhalable Dust | Gravimetric |
Analysis |
ACCESSORIES
Description | Pack Size | Part Number |
Protective Shield, for abrasive blasting environments | Each | 225-366 |
Button Sampler Calibration Adaptor | Each | 225-361 |
Filter Transport Case, for 25 mm diameter filters, conductive plastic | 10 | 225-67-10 |
Replacement O-ring PTFE, for Button Sampler | Each | P32265 |
Replacement O-ring BUNA-N, for Button Sampler | 50 | P31891 |
Glass Fibre filters, diameter 25 mm, 1.0 µm Liquid nominal pore size | 500 | 225-702 |
Mixed Cellulose Ester filters (MCE), diameter 25 mm, pore size 1.2 µm | 100 | 225-1912 |
PTFE filters with PMP support (Teflo®) # ‡ diameter 25 mm, pore size 3 µm | 50 | 225-1711 |
Gelatin filters, sterilised, diameter 25 mm † | 50 | 225-9551 |
Polyvinyl chloride filters (PVC), diameter 25 mm, pore size 5.0 µm | 100 | 225-5-25 |
Support Screen for Button Sampler, 25 mm diameter | Each | P26034 |
‡ Back pressure on PTFE filters can vary within the same lot | ||
† Gelatin filters dissolve when placed on agar | ||
# Maximum operating temperature is 240°C (464°F) |